This is a 120m bridge for a train. I'm a fan of slanty towers which support parts of the bridge, and with appropriately spaced foundations on the left-hand side I was able to put a set in here. Because the cables were not strong enough to support the entire bridge, I built a mini-supporting section underneath the right-hand side. The part is perhaps not as elegantly designed as it could be, so I'll probably have a redesign at some point.
Cost | $12831 |
Length | 120m |
Materials available | Iron, Cable, Heavy Steel |
No. Phases | 2 |
Wind speed | 5m/s |
Current speed | 2m/s |
Budget | $35000 |
Level designed by | Chronic Logic |